im the original owner from the dealer it had 20-25 hrs on it before i did a full off the chase restoration.
after the restoration i put 10-15 hrs on it. a total of 30-40 hrs over all. (very low)
its a 2006 last year made.no expense spared all parts are chrome the ones that came polished after market were sent to get chromed (even screws). that means no sitting around polishing for hours ;-)
top name brand parts,
some parts include!
v-force 3,
lone star,
cpi,
4mm stroke,
39mm carbs,
cheeta cub with drag port,
cool head,
k&n,
works shocks,
fullbore body,
plus 4 swing arm,
plus 2 rear axle,
plus 2 a-arms,
steel breaded lines,
upgraded water impeller,
upgraded stator,
wisco pistons,
y split fuel set up,
the throttle was changed to a bearing one,
the motor is set up to run 93 or 110 octane and the suspension is set up 50/50
half street and half trail.
too much to list has about over 8,000 in parts and a few more thousand in labor.
(anything else just ask)
asking $7,500 obo
that includes the bike and everything i got helmets, goggles, gloves, etc...













